424 Synthesizer Modular

424 Synthesizer Modular

Row1
1. MIDIGate – MIDIGate
5. NurkVCO – Voltage Controlled Oscillator
6. ALFO – Voltage Controlled Low Frequency Oscillator

Row2
2. NurkVCO – Voltage Controlled Oscillator
3. NurkVCO – Voltage Controlled Oscillator
4. Arch VCO – Voltage Controlled Oscillator
7. Quad Voltage Controlled Amplifier with Attenuator

Row3
2. NurkVCO – Voltage Controlled Oscillator
3. Arch VCO MKII – Voltage Controlled Oscillator
4. Arch VCO MKII – Voltage Controlled Oscillator
6. VCO 700 – Voltage Controlled Filter

Row4
1. Envelope Follower with Preamplifier
2. Voltage Controlled Diode Ladder Filter
4. VCF1 Custom – Voltage Controlled filter
5. VCF1 Custom – Voltage Controlled filter

Modulargrid

http://ninjanidiskus.net/ninjaniprojects/

Ninjani Diskus
Ninjani Diskus

Guitar/Bass Modular

Row 1

  1. (B)assman – Tube Preamplifier
  2. Alemthicc – Tube Preamplifier
  3. Watamp – Tube Preamplifier
  4. Dual Patch 1 In / 3 out
  5. 3 Channel Pan Stereo Mixer

Row 2

  1. Thumb Screwer – Overdrive
  2. HM-424 – Distrotion
  3. Puust – Booster/Clipper
  4. Sombressor – Compressor/Noisegate/Preamp
  5. Femder – Speaker Cabinet Simulator
  6. Warshall – Speaker Cabinet Simulator

(B)assman

(B)ASSMAN Tube Preamplifier

(B)ASSMAN Tube Preamplifier is based on the Fender BASSMAN 100’s “Bass Instrument” Preamp.
I use it with a 12ax7 or 6N2P-EV tube. (Undecided :#Q)
Great unique sound! 😛

Part of the 424 Guitar/Bass Modular.

  • Bass, Treble, Gain and Volume
  • “Deep” and Bypass switch with led on/off indicators

Schematics @ drtube.com

Multi-function Tester – TC1

MULTI-FUNCTION TESTER - TC1
MULTI-FUNCTION TESTER – TC1

Features:
It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.
It can also be used to detect infrared wave forms.
It also can detect zener diode and has the function of self-calibration.
One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too.
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.

Specifications:
Display: 1.8 inch TFT Screen (Colour)
Diode Range: < 4.5V
Zener Diode:Transistor Detect Area: 0.01-4.5V
Zener Diode Detect Area: 0.01-30V
Triac Range: IGT < 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50MΩ
Inductance: 0.01mH-20H
Battery: 0.1-4.5V
Power: Rechargeable Lithium Battery
Size: 8.8 x 8 x 2.8cm / 3.47 x 3.15 x 1.10in
Weight: 105g
Included:
1 x Multi-functional TFT Transistor tester
1 x Electronic component set
3 x Test hooks